How To Use Bilt Hamber RE-VIEW Glass Polish, Inc. Application Tips & Tricks

Bilt Hamber RE-VIEW is a powerful, active, glass polish. It effectively strips any glass contaminating films, water repellent coatings, hard water marks and mineral staining.

Unlike other glass polishes, RE-VIEW will remove these films even when used by hand. You're also able to speed up the process by using a machine polisher.

RE-VIEW is a deep cleaner only and will not remove scratches and other defects. We recommend taking a look at CarPro CeriGlass to treat fine to medium scratches.

Key Features of RE-VIEW:

• Powerful removal of oil, mineral stains and failed glass coatings.
• The residue can be washed away with water or buffed with a damp towel.
• RE-VIEW outperforms other glass polishes.
• It works by way of an advanced chemical and abrasive dual-action.
• Contains cerium oxide, which makes using RE-VIEW by machine a good experience as it'll haze better, ready for removal and final buffing.

How To Use Bilt Hamber RE-VIEW Glass Polish:

1. Treat only cool glass surfaces, out of direct sunlight.
2. Clean the glass with TRACE-LESS so that loose particulate dirt is removed.
3. For every 30cm square of glass, use a pea-sized amount of RE-VIEW.
4. Apply RE-VIEW using a damp, soft microfibre towel or microfibre applicator.
5. Work well into the glass using small, circular motions.
6. Lightly mist with water occasionally if the solution becomes dry, or if machine polishing/treating larger areas of glass.
7. The residue may be rinsed when still wet, or buffed away with a damp microfibre towel. A final buff can be completed with a dry microfibre towel.

Check Your Work:

Once you've finished polishing, test that the glass does not repel water. Do this by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat, uniform film of water. Wipe dry after your test.

Precautions:

• Ideally mask rubber and plastic trim before using RE-VIEW.
• Only apply RE-VIEW on glass surfaces.
• Do not use on aftermarket tinted windows or textured glass.
• Test at small scale on unusual glass finishes.
• Store in cool conditions and do not allow to freeze.
• Can be used on interior glass if stubborn contamination is present, however this is primarily for use on exterior glass surfaces.

Forensic Detailing Channel's YouTube video of RE-VIEW: